OSRAM LED HEADLIGHT RETROFIT PROJECTOR LEDPES101 V1.0

OEM Manufacturers finally caught on to what the aftermarket demanded, and Osram stepped up to the plate to produce the first Bi-LED projector retrofit kit from an OEM!

BI-LED Internalized drivers power Osram LEDs inside to the tune of approximately 2000lm/ea. The high beam is a shutter-free system using warmer Osram LED chips and separate internal optics to focus light down-range.

SIMPLE WIRING: Inputs of each side are only three wires. Wire these to an H4 / H13 / 9007 plug and plug ’em right up. No harness required!* (*Except for vehicles with finicky wiring or CANBUS bulb-out detection systems).

OEM QUALITY: If you’re putting together the most modern retrofit possible and money is no object, we think the Osram LEDDriving Bi-LED projectors are a fantastic choice. Sure with other Bi-LED’s making headway in the market – but Osram’s OEM technology is unmatched!

SHROUDS: Basically, they’re the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick! … Continue reading >OSRAM LED HEADLIGHT RETROFIT PROJECTOR LEDPES101 V1.0

$350.0

OEM Manufacturers finally caught on to what the aftermarket demanded, and Osram stepped up to the plate to produce the first Bi-LED projector retrofit kit from an OEM!

BI-LED Internalized drivers power Osram LEDs inside to the tune of approximately 2000lm/ea. The high beam is a shutter-free system using warmer Osram LED chips and separate internal optics to focus light down-range.

SIMPLE WIRING: Inputs of each side are only three wires. Wire these to an H4 / H13 / 9007 plug and plug ’em right up. No harness required!* (*Except for vehicles with finicky wiring or CANBUS bulb-out detection systems).

OEM QUALITY: If you’re putting together the most modern retrofit possible and money is no object, we think the Osram LEDDriving Bi-LED projectors are a fantastic choice. Sure with other Bi-LED’s making headway in the market – but Osram’s OEM technology is unmatched!

SHROUDS: Basically, they’re the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!

Description

OSRAM LED ALL-IN-ONE HEADLIGHT RETROFIT PROJECTORS

  • OSRAM PART NUMBER: LEDPES101 V1.0
  • PROJECTORS: 2x LHD
  • SHROUDS: Your Preference
  • WARRANTY: 2 Years
  • HOUSINGS: Fits most
  • INPUT VOLTAGE: 9-16V DC
  • KELVINS: 6000K (Low) / 4000K (High)
  • LUMINOSITY: 2000lm / ea. (est.)
  • INPUT VOLTAGE: 9-16V DC
  • INPUT POWER: 20 / 30W @ 12V D
  • WIRE PINOUT: Red – Low Beam, Blue – High Beam, Black – Ground

Leave a Reply

Your email address will not be published. Required fields are marked *