MORIMOTO MINI H1 7.0 BI XENON

 

  • PROJECTORS: 2x Morimoto Mini H1 7.0 Bi-Xenon
  • HARDWARE PACKS: 2x Lock Rings, Bulb clips, etc.
  • SOLENOID INPUTS: 2x 9006 Male Sockets
  • WARRANTY: 3 Years
  • DIRECT FITMENT: H4, H7 Headlights (little/no mods required)
  • MODIFICATIONS REQUIRED: H1,H11,H13,9005,9006,9007 housings
  • BULB TYPE: H1 HID Only
  • SHROUDS: All Styles (w/ Centric Rings)
  • DEPTH: 139mm (includes bulb holder)
  • WIDTH: 88mm
  • HEIGHT: 73mm
  • LENS DIAMETER: 2.5″
  • MOUNTING SHAFT: 20mm Diameter
  • HOUSING DEPTH: 115mm Minimum
  • STANDARD LENS: 100% clarity “Kuria Optic” glass

Continue reading >MORIMOTO MINI H1 7.0 BI XENON

$120.0

 

  • PROJECTORS: 2x Morimoto Mini H1 7.0 Bi-Xenon
  • HARDWARE PACKS: 2x Lock Rings, Bulb clips, etc.
  • SOLENOID INPUTS: 2x 9006 Male Sockets
  • WARRANTY: 3 Years
  • DIRECT FITMENT: H4, H7 Headlights (little/no mods required)
  • MODIFICATIONS REQUIRED: H1,H11,H13,9005,9006,9007 housings
  • BULB TYPE: H1 HID Only
  • SHROUDS: All Styles (w/ Centric Rings)
  • DEPTH: 139mm (includes bulb holder)
  • WIDTH: 88mm
  • HEIGHT: 73mm
  • LENS DIAMETER: 2.5″
  • MOUNTING SHAFT: 20mm Diameter
  • HOUSING DEPTH: 115mm Minimum
  • STANDARD LENS: 100% clarity “Kuria Optic” glass

Description

BI XENON PROJECTORS: Morimoto’s new Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since their launch, it’s one of the most advanced headlight projectors in the world today. Revised optics paired with a cast-curved cutoff shield produces one of the widest low beam patterns we’ve ever seen and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.

HID BALLAST: Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in one place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Aftermarket HID ballasts aren’t all the same, and the XB’s make that clear in almost every category in our opinion.

H1 HID BULB: Morimoto will out-perform any alternatives on the market when installing in projector-based headlights…and it shows. We admit the latest generation XB HID  bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high-quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. You will be seeing everything at night.

OPTIONAL BULB HOLDER: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that’s way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it’s the single best upgrade to the projector that’s ever been conceived since it helps make the most of the awesome 7.0’s on the road. Well worth the extra few bucks in the grand scheme of things!

Leave a Reply

Your email address will not be published. Required fields are marked *